FW Mod Czech Firmware 2.4.0.32 / 1.8.0.34 | Mi Band 3 & Mi Band 3 NFC

MRMR

Well-known member
Contributor
Joined
Aug 10, 2018
Messages
433
Likes
642
Points
108
#1
Czech Firmware for Mi Band 3
Mi Band 3 v2.4.0.32 (Mili_wuhan, Mili_hankou) without NFC
Mi Band 3 v1.8.0.34 (Mili_chongqing) with NFC



Use it with Modified CZ - Resources v49 only!
( CZ - Resources v49 | Mi Band 3 & Mi Band 3 NFC )

Last Updated: Jun 23, 2020

The maintainers
★ Currently Main: @rendal
★ Secondary: @MRMR

Warning
Unofficial version of FW, use the firmware at your own risk.
We aren't responsible for bricked devices.
All Custom Firmwares has been tested.

Introduction
This thread contains modified Czech firmware. The firmware also contains modifications (listed below).​

Preview:


How to do it / FAQ
Install FW on iOS (CZ)
If there is a problem with correct viewing after flash FW, flash the Official Font to MB3.​
How to use NFC (Forum), Transport card functions (Guide, CZ with google translator)​
? ⤳ Forum Rules | FAQ ⬿ ?​

Applications
★ Mi Fit Modified:
CZ Weather "small letters" by @MRMR
Unlock Caller ID
Features in Settings menu​
Mi Fit V4.0.11 by @Michellincz ver. 26.10.19 20:17 (older versions: V4.0.10)​
Included CZ FW v2.4.0.32 | v1.8.0.34​
CZ Weather "Capital letters" by @Michellincz
Unlock Caller ID
Mi Fit V4.0.7 by ilgruppotester "Gizchina.it" (older version)​
With xShadow menu
Unlock NFC​
★ Mi Fit Original: V4.2.0 (older versions)
★ Gadgetbridge V0.44.2 (older versions)
MB3Editor by @xpaulos2, editor for MB3 FW / RES / Translations

Firmware Mods
Czech language is set as fixed.
Translation to CZ using the tool MB3Editor by @xpaulos2.​
Translation Credits: @MRMR, @rendal, @iamstven, @Agent_X.​
Choose in ZIP Archives of the FW - FW with change Internal version to "Fake" v9.9.9.99 (you must used with Resources v49 with "Fake" version v99 !!!! - by @rendal.​
Firmware Mods (repack modifications by @xpaulos2):
Force fixed date format to "D.M" by @majsi.
Number of notifications changed from 5 to 16 by @majsi.
Time to display received notifications to 15 sec by @majsi.
Added icon for received notifications by @majsi.
Added icon and battery status by @majsi.
Long Days in Weather informations by @majsi.
Added Calendar sheets instead of "About" (excluding for Mili_chongqing) by @majsi.

Changelog
31.01.2020 14:40 - FW v2.4.0.32 / 1.8.0.34 - Mod Version 0.2
07.01.2020 17:00 - Mod Version 0.1
08.10.2019 14:00 - Mod Version 0.0
11.07.2019 17:07 - FW v2.4.0.20 / 1.8.0.22 - Mod Version 0.0
Known Issues
No known problems​
Firmware Downloads
( ZIP archive, unpack. MD5 and "Fake" version in ZIP. )​
⤳ Mi Band 3 without NFC:
Mili_hankou:
FW_Mili_hankou_V2_4_0_32_CZ_Mod-v02.fw
..... and _fake-V9_9_9_99.fw
Mili_wuhan:
FW_Mili_wuhan_V2_4_0_32_CZ_Mod-v02.fw
..... and _fake-V9_9_9_99.fw

⤳ Mi Band 3 with NFC (Mili_chongqing)
FW_Mili_chongqing_V1_8_0_34_CZ_Mod-v02.fw
..... and _fake-V9_9_9_99.fw


Official Fonts
( ZIP, unpack for use )​
Fonts_stock_v1_ft.zip - Standard
Fonts_stock_v1_ft_kj.zip - Korean / Japanese

Archives
( ZIP, unpack for use )​
★ Mi Band 3 without NFC (Mili_wuhan):
★ Mi Band 3 without NFC (Mili_hankou):
★ Mi Band 3 with NFC (Mili_chongqing):
 

Attachments

Last edited:

jenes

Active member
Joined
Aug 15, 2018
Messages
57
Likes
75
Points
28
#3
Custom resources V46 for Czech Firmware 2.2.0.14, 2.2.0.42, 2.3.0.2
+Archive older versions of firmwares and resources
(most of these resources are taken from the forum section resources and updated to version V46
(if necessary) and adapted to the Czech version)

Last edit: 30.11.18
30.11.18- all res updated to V46
22.11.18- update all resources for calendar function
22.11.18- add
Res44-newredesigned-with-oblique-stripe_cz.res
Res44-newredesigned-with-checked_cz.res
Res44-NewRedesigned-Modern_Theme_clock_cz.res
Res44-NewRedesigned-digital clock_cz.res
res44 mixed clocks with NewRedesigned icons_cz.res
7.11.18- add Mili_wuhan_CZ_v44_SBS.res, Combo_light_V44_cz.res,Combo_V44_cz.res
6.11.18- update all resources to V44, add six light themes, change system of downloads
5.11.18- add info videos for all resources
5.11.18- add Wuhan_1.8.0.0_CZ_BIN.res
5.11.18- change steps bar on main screen in Wuhan_1.8.0.0_cz_heart_pikachu_v2.res and Modern_theme_V42_cz_v2.res
5.11.18- add video to modern theme res
5.11.18- add archive
Android_Oreo_V1_Res_V46_cz.res
Combo_light_V46_cz.res
Combo_V46_cz.res
Digi-Stencil-DiceCOMBO_V46_cz.res
DigitalClock_V46_cz.res
Heartbeat_V46_cz.res
Light_Theme_C_v46_cz.res
Light_Theme_CR_v46.res
Light_Theme_N_v46_cz.res
Light_Theme_NR_v46_cz.res
Light_Theme_OS_v46_cz.res
Light_Theme_OSR_v46_cz.res
Mili_wuhan_CZ_v46_SBS.res
Modern_theme_V46_cz.res
Pikachu2_theme_V46_cz.res
res46 mixed clocks with NewRedesigned icons_cz.res
Res46-NewRedesigned-digital clock_cz.res
Res46-NewRedesigned-Modern_Theme_clock_cz.res
Res46-newredesigned-with-checked_cz.res
Res46-newredesigned-with-oblique-stripe_cz.res
Rounded Icons_V46_cz.res

Download



archive of older versions fw, res and ft
(The archive runs every day from 6:30 am to 10:00 pm, running on my personal server to simplify my work with it and time consuming to keep up-to-date.)
 
Last edited:

thorazgard

Active member
Joined
Aug 8, 2018
Messages
124
Likes
90
Points
38
#4
Jak nahrát CZ firmware pomocí Gadgedbridge v 10-ti krocích:
Po aktualizaci aplikace Mi Fit na na novější verzi než máte se nahraje i nejnovější firmware který je součástí aplikace a pokud máte čínskou verzi náramku tak se nahraje automaticky čínský firmware a potřebné resources.

Pro správnou funkci češtiny je třeba mít upravenou Mifit CZ aplikaci, český firmware a správné resources v CZ verzi.

1) Zapněte viditelnost náramku v Mifit aplikaci, na hlavní aplikace vpravo dole profil ->Moje zařízení Mi Band 3 a zatrhout Viditelný.



2) Na stejné obrazovce dole -> Odpárujte náramek, předejdete bricknutí/zničení náramku při nahrávání FW. MRMR by mohl vyprávět.



3) Spárujte náramek v aplikaci Gadgedbridge kliknutím na +



4) Gadgetbridge by měl náramek najít pokud jste provedli správně předchozí kroky



5) Stačí dát šipku zpět



6) A máte Mi band 3 připojen! :)



7) Teď stačí otevřít vybrat soubor, který chcete aktualizovat v kterémkoliv prohlížeči souborů. Postupujte v tomto pořadí:
  • Firmware
  • Resources
  • Font - největší soubor, nahrávání trvá cca 5 minut
Mějte náramek co jejblíž telefonu.

Já používám Dropbox, synchronizuji složku s telefonem skrz wifi, nebo data, stačí když to nakopíruji do svého Dropboxu v PC, sesynchronizuje se to a tak nemusím kopírovat soubory do telefonu skrz kabel. Doporučuji.



8) Dáme instalovat....



9) Odpárovat



10) A na konec ukončit. A stačí spárovat znovu v Mifit

 
Last edited:
Joined
Sep 12, 2018
Messages
3
Likes
5
Points
8
#5
Pokud bych chtěl verzi jen s procenty a ikonkou u hodin, bez změny na obálku při notifikaci. Tak kterou verzi fw a res použít. Mám teď verzi kdy musím na náramku potvrdit přečtením abych viděl procenta baterie+ikonku baterie. A to většinou už mám přečtene z telefonu tak číst a mazat znovu při tom počtu upozornění co mě chodi je tak trošku otravné.....

If I wanted the version only with percentages and icons at the clock, no change on the envelope when notifying. So which version of fw and res use. I now have the version I have to confirm on the brace by reading to see the percentage of battery + battery icon. And most of the time I have read from the phone so read and delete again when the number of warnings I walk is so a little annoying .....
 
Joined
Sep 12, 2018
Messages
3
Likes
5
Points
8
#7
Ok, díky a .res můžu nechat ty co mám, co jsou pro baterii+obálku nebo jine?

Ok, thanks and .res I can leave what I have, what are battery + envelope or other?
 

MRMR

Well-known member
Contributor
Joined
Aug 10, 2018
Messages
433
Likes
642
Points
108
#8
Jj, nech stejné, bude to fungovat, obálka je na pozici čínského znaku, tak to pojede.
 

peetman

New member
Joined
Sep 6, 2018
Messages
29
Likes
3
Points
3
#9
Má tu někdo taky datum, tedy spíš dnešní den místo Ned... se mi zobrazuje Ndz


Does anyone have a date here, more so today instead of Ned ... is showing me Ndz
 

MRMR

Well-known member
Contributor
Joined
Aug 10, 2018
Messages
433
Likes
642
Points
108
#11
Má tu někdo taky datum, tedy spíš dnešní den místo Ned... se mi zobrazuje Ndz


Does anyone have a date here, more so today instead of Ned ... is showing me Ndz
Musíš si ještě nahrát RES pro CZ... , viz. první příspěvek...
 
Joined
Jul 14, 2018
Messages
16
Likes
4
Points
8
#12
Firmware "CZ_BATT_NOT" je jednoznačně nejlepší. Moc děkuji !!.
Jinak, pokud má náramek méně než 5% baterky, nejde přes Gatgetbridge flashnout. Hlásí to chybu. Třeba to někomu může pomoci.

Firmware "CZ_BATT_NOT" is definitely the best.
Otherwise, if the Band3 has less than 5% battery of, the flashlight it can not go through Gatgetbridge. It reports a bug! Maybe someone can help...
 

MagicalUnicorn

Moderator
Staff member
Moderator
Developer
Joined
Jul 4, 2018
Messages
4,657
Likes
4,087
Points
248
#14
Firmware "CZ_BATT_NOT" je jednoznačně nejlepší. Moc děkuji !!.
Jinak, pokud má náramek méně než 5% baterky, nejde přes Gatgetbridge flashnout. Hlásí to chybu. Třeba to někomu může pomoci.

Firmware "CZ_BATT_NOT" is definitely the best.
Otherwise, if the Band3 has less than 5% battery of, the flashlight it can not go through Gatgetbridge. It reports a bug! Maybe someone can help...
Because you must have more than 15 or 20% battery for flash with GadgetBridge.
 
Joined
Jul 14, 2018
Messages
16
Likes
4
Points
8
#15
Ano. Jinak výdrž náramku je oproti Mi Band2 poloviční. To je velké zklamání. Bohužel.

Yes. Otherwise the capacity of the bracelet is half that of Mi Band2. This is a great disappointment. Unfortunately.
 

MagicalUnicorn

Moderator
Staff member
Moderator
Developer
Joined
Jul 4, 2018
Messages
4,657
Likes
4,087
Points
248
#16
Ano. Jinak výdrž náramku je oproti Mi Band2 poloviční. To je velké zklamání. Bohužel.

Yes. Otherwise the capacity of the bracelet is half that of Mi Band2. This is a great disappointment. Unfortunately.
I have 20 days battery life with my Mi Band 3, and I had same time with my Mi Band 2 :).

You use features like auto heart rate ?
 

tr3x

New member
Joined
Oct 23, 2018
Messages
8
Likes
12
Points
3
#17
Jak nahrát CZ firmware do Mi band 3 náramku v iOS zařízení..

odkaz na AmazTools : App Store

1) Zapněte viditelnost náramku v Mifit aplikaci, na hlavní aplikace vpravo dole profil ->Moje zařízení Mi Band 3 a zatrhout Viditelný a necháme aplikaci MiFit běžet v pozadí!

2) Zapneme aplikaci AmazTools a necháme se provést průvodcem a klikneme na "Setup"

3) Najdeme náš Mi Band 3

4) Zvolíme náš Mi Band 3

5) Když máme spárováno tak dole v pravo klikneme na "More"

6) Zvolíme "Install custom file"

7) Stažené soubory které nalezneme ZDE dáme na iCloud a zvolíme námi požadovaný soubor na instalaci

8) Klikneme na "Install" a počkáme a máme hotovo :)
 

metaathron

New member
Joined
Aug 15, 2018
Messages
23
Likes
22
Points
3
#18
Ahoj, chápu dobře že texty vztahující se k počasí nejsou součástí firmware ani zdrojů, ale posílá je přímo aplikace - Mi Fit nebo Notify? Moje dnešní počasí je: "Roztrousene neby."
A ještě jednou bych orodoval za přidání data buildu přímo do názvu souboru.


Hi, did I understand correctly, that weather strings are not part od firmware or resources, but are sent by the app itself - Mi Fit or Notify?
Also, I would like to speak up for putting build date in the filename.
 

thorazgard

Active member
Joined
Aug 8, 2018
Messages
124
Likes
90
Points
38
#19
Ahoj, chápu dobře že texty vztahující se k počasí nejsou součástí firmware ani zdrojů, ale posílá je přímo aplikace - Mi Fit nebo Notify? Moje dnešní počasí je: "Roztrousene neby."
A ještě jednou bych orodoval za přidání data buildu přímo do názvu souboru.


Hi, did I understand correctly, that weather strings are not part od firmware or resources, but are sent by the app itself - Mi Fit or Notify?
Also, I would like to speak up for putting build date in the filename.
Modified Mi Fit
Mi Fit_3.5.2
(CZ weather - all leters small)


čemu tady nerozumíš? :) vše je v prvním postu ...
Pro správnou funkčnost počasí musíš mít modifikovanou MiFit aplikaci, CZ firmware + resources.
 
Last edited:

Lubosxp

New member
Joined
Nov 3, 2018
Messages
3
Likes
1
Points
3
#20
Today at 8:18 AM
#603

Funguje vám zasvietenie displeju keď zdvihnete ruku? Mne to funguje ale počase to prestane fungovať musím ísť do mi fit aplikácie a zapnúť vypnúť túto funkciu a potom to zas dočasne ide.
A ešte otázka mi fit mi nesynchronizuje náramok iba keď ho najprv spojím cez gadgetbridge app je to normálne? Dík za odpoved
 

Trusted Store

Members online

Our Telegram Channel

Which color of official strap would you like to buy for your Mi Band 3?

  • Black

    Votes: 2,154 52.8%
  • Deep Blue

    Votes: 1,197 29.4%
  • Redish Orange

    Votes: 726 17.8%

Forum statistics

Threads
2,408
Messages
40,524
Members
211,820
Latest member
careylui
Top