APP Mod Hey+ App

Joined
Nov 27, 2018
Messages
24
Likes
7
Points
13

haveit

New member
Joined
Nov 15, 2018
Messages
4
Likes
0
Points
1
Buttons (Green/Red/Orange) are pictures, can't be translated :).

Can you send me photo in good quality under card description ?
Yes, that's like my Hey+ after flash - english version, the button still Chinesse.
 
Last edited by a moderator:
Joined
Dec 13, 2018
Messages
82
Likes
5
Points
13
Install the "Hey Plus - Flash Firmware" and do the "Step 2".
if I have done it several times I give configuration-version firware, I turn off the bluetooth and I give update, then when it gives the error I put the file 1 in internal storage-android-data -com.ryeex.groot - cache-firmware and then there is only one folder called 107402 I open it and there is another one called 1.6.15, I open it and there are files equal to yours and I copy it, I go back to the app I turn on the bluetooth and I continue with the update, and when the bracelet it restarts and returns to give the error I give it to cancel and also I have tried giving it to continue, but it starts again ...
 
Joined
Nov 22, 2018
Messages
23
Likes
6
Points
8
This must be user error. If you follow the guide it must be successful, i made it many times and with success. Read the guide again carefully and follow every point like described.
 
Joined
Dec 13, 2018
Messages
82
Likes
5
Points
13
This must be user error. If you follow the guide it must be successful, i made it many times and with success. Read the guide again carefully and follow every point like described.
Maybe it's my phone model. It's a Samsung Galaxy S9 +
 
Joined
Dec 13, 2018
Messages
82
Likes
5
Points
13
If someone had a video doing it so I could see what I'm doing wrong because of me. I think I'm doing everything right.
 
Joined
Oct 26, 2018
Messages
29
Likes
7
Points
8
Joined
Oct 30, 2018
Messages
2
Likes
0
Points
1
This is great firmware for Hey Plus, But i have many question ;)
How to mod firmware for this Hey Plus ?
Do you have any tutorial ? Do modification this firmware in Hex Editor ?

I ask you, because i need polish alphabetic ;) And i would polish firmware for Hey Plus ;)

P.s - English firmware in Hey Plus great working with original apps Hey+ in Iphone 6s ;)
 

MagicalUnicorn

Moderator
Staff member
Moderator
Developer
Joined
Jul 4, 2018
Messages
4,657
Likes
4,087
Points
248
This is great firmware for Hey Plus, But i have many question ;)
How to mod firmware for this Hey Plus ?
Do you have any tutorial ? Do modification this firmware in Hex Editor ?

I ask you, because i need polish alphabetic ;) And i would polish firmware for Hey Plus ;)

P.s - English firmware in Hey Plus great working with original apps Hey+ in Iphone 6s ;)
There isn't tutorial.

Also, if in Polish words/sentences are more long than English translations, it isn't possible to make a Polish Firmware, or with words/sentences cutted or not displayed entirely ^^. That why I only make English Firmware.
 
Joined
Oct 26, 2018
Messages
29
Likes
7
Points
8
I am not having any luck getting the English firmware installed on the band. I've tried several times, and paid close attention to the instructions.
But the two sets of instructions above are different.
The first one says (Step 2: turn off Wifi and mobile). It does not say if or when to turn them back on.
The second one says (Step 2: turn off Bluetooth). Later it says to turn Bluetooth back on.
Is one of these sets of instructions incorrect?
 
Joined
Oct 26, 2018
Messages
29
Likes
7
Points
8
Here is a step-by-step record of what I did:

(My WiFi is connected throughout this process)

  1. Installed HeyPlus_1.1.1.2_Flash.apk
  2. Opened HeyPlus App
  3. (cancel update msg that appears when I open it)
  4. Go to Settings > Firmware (brings up an Update button)
  5. Turned off Bluetooth
  6. Press Update in HeyPlus app
  7. Fails instantly (Firmware transfer failed). I get Cancel / Retry options
  8. Copied the "1" file into the directory
  9. - Android/data/com.ryeex.groot/cache/firmware/127773/1.6.15
  10. Turned on bluetooth
  11. Waited a minute
  12. Back in HeyPlus, pressed Retry
  13. Phone starts Firmware upgrade (message says "downloading ...)
  14. Band displays green button with arrow pointing up ... counts up % same as on phone)
  15. After a while, band buzzes. Phone says "Upgrade failed"
  16. I press "Cancel"
  17. Band is still in Chinese.
----------------------------

(I tried again, with WiFi off, but that didn't work.)
 
Joined
Oct 26, 2018
Messages
29
Likes
7
Points
8
SUCCESS !!!!
I don't know what I did differently, but I gave it one more try - and my band now speaks English !!
This is good, because my next option was to learn to read Chinese :). I would LOVE to do that, but i think I'll stick with the solution i have :)
Thanks again to everyone here ... especially M Unicorn :)
 
Joined
Dec 13, 2018
Messages
20
Likes
3
Points
3
I have updated firmwaew in band , but some things ist chinese.
when someone calls.

Android/data/com.ryeex.groot/cache/firmware/XXXXXX/1.6.15
replace in folder file 1 from zip file


In file 1.6.15 is two file One is a 1 second is a 0 its correctl ?
 
Last edited by a moderator:

MagicalUnicorn

Moderator
Staff member
Moderator
Developer
Joined
Jul 4, 2018
Messages
4,657
Likes
4,087
Points
248
Firmware is updated !
⤳ Dec 15 2018 :
★ Translation when you receive call is fixed.


Unecessary say me buttons aren't in English, it's pictures.

If you find sentences not translated say me
(and if you can join picture of the sentence in good quality is better :p)
 

Trusted Store

Members online

Our Telegram Channel

Which color of official strap would you like to buy for your Mi Band 3?

  • Black

    Votes: 2,154 52.8%
  • Deep Blue

    Votes: 1,197 29.4%
  • Redish Orange

    Votes: 727 17.8%

Forum statistics

Threads
2,409
Messages
40,536
Members
211,858
Latest member
eldonITA00
Top